Prices for sewerage installation in a detached house range from €5000 to €25 000

The first quality criterion for sewer sealing is that the work is done properly, one time, in accordance with the certificates.
The work is underground and can only be done once.
If the work is done badly, it cannot be repaired and the old sewers might have worked better.
Taloturva was the first diving company in the industry to do drains in single family homes.
We if anyone knows what sewer repairs cost.

Sewer blockage price affected

1. Drainage points (toilet seat, sinks and floor drains).
2. Metreage for diving
3. Type of outdoor well, Concrete well (large), inspection well or self-contained well system
4. Ventilation duct type and volume
5. Is there an inspection hatch in the house
6. House m2 and number of storeys
7. Pipe material, Cast iron, concrete, plastic. The house may also contain more than one material.

Comments:

-Drainage wells will not be renovated

-Good to soak the garage floor drains

-Some may suggest leaving part of it unplugged. You should not get involved in this without a reason!

-The number of ventilation ducts is indicated by the roof penetrations, these can also be in the upper floor.

-Ventilation ducts should always be plugged! The manufacturer’s warranty may otherwise be invalidated. Water enters the ventilation drain and this run-off water can get between the drainage socket and the old pipe. This means that there is a risk that an otherwise well-done soaking will be ruined by not soaking the ventilation drain.

-Whether the sewer should be connected to the well or to the boundary of the property. This is worth checking with an expert.

-Ventilation duct may also be treated as a suction valve inside, so no pipe goes to the roof

We calculate an offer for each property according to your needs and often properties that look the same from the outside can have different prices.

Plastic sewers should first be described and, on this basis, the sewer sealing should be assessed,

How do I know if it makes sense to soak the plastic drains in our home?

• In 1970s-1980s private houses, plastic drainage pipes are often located in the insulation between the pipes, rather than in the sand.When the pipe leaks, this seeps into the structure.
  Moisture can accumulate in the intermediate insulation, causing odours in the apartment
• The lifespan of plastic sewer pipes depends on installation, use and conditions, but is generally around 35 years.Insurance companies often do not provide cover for sewer pipes over 40 years old.
• The 130 m2 house has about 50 sewer connections and 100 seals, which multiplies the potential problems.

1. History of manufacturing:

• The manufacture of PVC plastic sewer pipes began in 1965 and the first problems quickly became apparent with the advent of hot water, led by the increasing use of dishwashers.
  PVC plastic cannot withstand the temperature differences between cold sewer gases and the water being discharged.
• HT (High Temperature) pipes were introduced in 1976 in response to the challenges of heat resistance.
• Old stocks were sold for years afterwards.
  Old and new plastic pipes could be mixed up in installations until the 1980s.
• Plastic sewers become vitrified and brittle as the plasticizers used in the sewers evaporate from the pipe.
  The pipe can be easily broken by mechanical shock or vibration.

1. Installation errors

• In the early 1970s, the installation of plastic sewer pipes became easy and was mainly done by carpenters.

This meant that there was no training to install the pipes.

Problems detected:

• The sealing ring was attached to the sleeve, so that the seal came off.
  The most common reason was that the lubricant was not always used.
• The joints were not installed at the bottom.
  Temperature fluctuations or inadequate mooring increase the risk
• The pipe supports and pouring are out of order due to poor foundation work.
  This can cause deformation of the pipe or water to accumulate on the bottom.
• Pipes outside the house were at risk from soil changes or ground pressure.
• Mineral oil used as a solvent weakens seals so that there may be nothing left of the seal
• The sealant was left out and replaced with glue.
  The glue is no longer a good sealant

1. Floor drains:

• In the early 1970s, plastic floor drains started to become more common, using mainly PVC until the 1980s.

Sewer plugging may seem like a complicated process at first glance, but in principle, plugging installation is straightforward.
However, it is important that the drain blocking is carried out by a skilled person with specialist knowledge to ensure that the job is done to a high standard.

Materials used in sewer sealing:

Felt sock with pressure membrane: the core material of the graft is a felt sock with a pressure membrane on the inside.
This felt is impregnated with plastic, which remains on top of the old pipe.
When the felt sock hardens, it forms a new plastic pipe.
The pressure membrane side remains as the inner surface of the pipe, along which the substances move in the sewer.

Hard:

The hardener is the substance that hardens the plastic epoxy to the felt sock.
It ensures these together form a strong and durable coating.

Epoxy:

Epoxy is a plastic material impregnated with a plank into a felt sock.

The socketing materials used are designed to achieve a service life of 30-50 years.
These materials are EuroFins approved, and installation is carried out in strict accordance with the manufacturer’s instructions.
Regular spot checks are carried out on both materials and installation methods to ensure their quality.

Responsible installation:

House security always insists on responsible installation of socketing.
Although the diving industry may sometimes mix up materials on a whim for price reasons, Taloturva always adheres to tested and safe chemical mixtures.
We do not compromise on quality, and we carry out regular inspections to ensure that all diving is carried out responsibly and safely.

Sewer socketing offers a durable solution, and the materials and installation methods used are key to ensuring that the socketing lasts for decades.

In 2012, we started doing plumbing renovations in a detached house and at that time, renovations were done in many ways.
They wanted to make a change and put together a team of professionals to develop a single-family home plumbing renovation. A way was born to do the job “in 3 days” – without evacuation and without damaging structures. We are still on this path and every day we are working to make our approach more efficient and better.

So, no successful drain blockage is based not on the virtuosity or luck of the installer, but on a sophisticated installation method and testing.
House security is still only focused on plumbing repairs in detached houses.

Why can you get a sewer lock from the building security system?

An entrepreneurial company

We have wanted to maintain a good working community and pay our plumbers a decent wage.
Sewer fitters work with an entrepreneurial spirit and everyone works as if for themselves.
When a sewer fitter wants to continue working for the company, this is reflected in their responsibility and professional ethics.
An entrepreneurial mental plumbing work community develops a fitter’s attitude and is also able to be critical of their own work and deal with any plumbing complaints that arise.
The best part of it all, however, is that the Sewer Fitter serves each customer from start to finish, as well as taking responsibility for providing a sewer fitting experience better than the expectations were at the origin.

The professionalism of a sewerage installer

We’ve been lucky, we used to get the best sewer fitters in the business to work for Taloturva, and they’ve stayed with us.
Together, we have been able to focus on developing the soaking process over the long term.
The installers at Taloturva have attended training courses organised by the company and the supplier, and have been properly trained for the job.
The plumber does the same repetition every week, so every little detail is polished.
Most of the sewer fitters have their first training course organised by an external school, “basic training for a sewer fitter”.
A trained plumber is professional and cares about the environment.

Building security practices in sewerage support

The company has an active diving field management team, which participates in the installations and monitors the quality of the work.
The submergence field management visits the completed sites and evaluates possible improvements that can be given to the sewerage contractor.
Customers praise the sewer installer to the foreman, but it is the foreman’s job to evaluate the installation from the point of view of his own professionalism.
House Security regularly organises Sewer Fitting installation training courses, with an emphasis on the written installation method.
Our internalised installation approach is reflected in the fact that quality is consistent in every completed project.

Guarantees and certificates for sewerage piping

Let’s just say that the best guarantee is to get the job done right the first time, especially when the work to be done is underground work that needs to be put in place all at once.
Warranties and certificates are an added bonus to renovation.

Building security gives a 10-year installation guarantee for sewer locks.
This means that we believe in our own work, that for 10 years there will be no need to complain about a faulty installation.

We use the guidelines for drain sealing materials provided by the pipe manufacturer.
The industry may mix raw materials on a whim and the chemical behaviour of these has not been studied in detail by anyone.
When properly used, the pipe manufacturer’s materials give a minimum of 35 years of service life.
We also follow the general installation guidelines, which aim for a 50-year service life.

Free sewer mapping

We always survey each sewer in advance, free of charge.
This means that we come to your home and take a picture of the drains and make a condition assessment.
This always allows us to size the item more accurately and get the right price for the sewer installation.
This requires the right customer service attitude from the company, as the easiest way would be to send a quote by email.
This is reflected in the fact that reality and price get mixed up at the installation stage.
At Taloturva, we always handle the job in such a way that there are no afterthoughts.